ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 78)

ZyWALL 100 Internet Security Gateway
Internet Access 8-1
Chapter 8
Internet Access
This chapter shows you how to configure your ZyWALL for Internet access.
8.1 Internet Access Setup
You will see three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE
Encapsulation. Contact your ISP to determine what encapsulation type you should use.
8.1.1 Ethernet Encapsulation
If you choose Ethernet in menu 4 you will see the next screen.
Figure 8-1 Menu 4 — Internet Access Setup (Ethernet)
The following table describes this screen.
Table 8-1 Internet Access Setup Menu Fields
FIELD DESCRIPTION
ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP. This information is
for identification purposes only.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: