ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 52)

ZyWALL 100 Internet Security Gateway
SMT Menu 1 – General Setup 4-3
4.3.1 Configuring Dynamic DNS
To configure Dynamic DNS, go to Menu 1 — General Setup and press [SPACE BAR] to select Yes in the
Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS (shown next).
Figure 4-2 Configure Dynamic DNS
Follow the instructions in the next table to configure Dynamic DNS parameters.
Table 4-2 Configure Dynamic DNS Menu Fields
FIELD DESCRIPTION EXAMPLE
Service Provider This is the name of your Dynamic DNS service provider. WWW .DynDNS.ORG
(default)
Active Press [SPACE BAR] to select Yes and then press [ENTER] to
make dynamic DNS active. Yes
DDNS Type Press [SPACE BAR] and then [ENTER] to select DynamicDNS
if you have a dynamic IP address(es). Select StaticDNS if you
have a static IP address(s).
Select CustomDNS to have dyns.org provide DNS service for a
domain name that you already have from a source other than
dyndns.org.
At the time of writing, dyndns.org provides the basic
DynamicDNS and StaticDNS services along with a limited
number of hostnames for free, but charges a fee for
CustomDNS. See
www.dyndns.org for details.
DynamicDNS
(default)
Host Enter the domain name assigned to your ZyWALL by your
Dynamic DNS provider. me.dyndns.org
EMAIL Enter your e-mail address. mail@mailserver
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= Yes
DDNSType= DynamicDNS
Host=
EMAIL=
USER=
Password= ********
Enable Wildcard= No
Offline= N/A
Press ENTER to confirm or ESC to cancel: