ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 55)

ZyWALL 100 Internet Security Gateway
5-2 WAN Setup
Figure 5-1 Menu 2 — WAN Setup
The following table contains instructions on how to configure your WAN setup.
Table 5-1 WAN Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
MAC Address:
Assigned By Press [SPACE BAR] and then [ENTER] to choose one of two methods
to assign a MAC Address. Choose Factory Default to select the factory
assigned default MAC Address. Choose IP address attached on LAN
to use the MAC Address of that workstation whose IP you give in the
following field.
IP address
attached on
LAN
IP Address This field is applicable only if you choose the IP address attached on
LAN method in the Assigned By field. Enter the IP address of the
computer on the LAN whose MAC you are cloning.
192.168.1.35
Dial-Backup:
Active Use this field to turn the dial-backup feature on (Yes) or off (No). No
Phone
Number
Enter the telephone number assigned to your line by your telephone
company. This field only accepts digits; do not include dashes and
spaces. 1234567
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Phone Number=
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel: