ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 228)

ZyWALL 100 Internet Security Gateway
System Information and Diagnosis 21-11
Follow the procedure below to get to Menu 24.4 - System Maintenance – Diagnostic.
Step 1. From the main menu, select option 24 to open Menu 24 - System Maintenance.
Step 2. From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System Maintenance -
Diagnostic.
Figure 21-10 Menu 24.4 — System Maintenance — Diagnostic
21.4.1 WAN DHCP
DHCP functionality can be enabled on the LAN or WAN as shown in Figure 21-11. LAN DHCP has
already been discussed. The ZyWALL can act either as a WAN DHCP client (IP Address Assignment
field in menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet)
or None, (when you have a static IP). The WAN Release and Renewal fields in menu 24.4 conveniently
allow you to release and/or renew the assigned WAN IP address, subnet mask and default gateway in a
fashion similar to winipcfg.
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A