Sa monitor, Introduction, Using sa monitor – ZyXEL Communications Internet Security Gateway ZyWALL 100 User Manual
Page 304: Chapter 29 sa monitor, 1 introduction, 2 using sa monitor

ZyWALL 100 Internet Security Gateway
SA Monitor
29-1
Chapter 29
SA Monitor
This chapter teaches you how to manage your SAs by using the SA Monitor in SMT menu 27.2.
29.1 Introduction
A Security Association (SA) is the group of security settings related to a specific VPN tunnel. This menu
(shown next) displays active VPN connections.
When there is outbound traffic but no inbound traffic, the SA times out
automatically after two minutes. A tunnel with no outbound or inbound traffic is
"idle" and does not timeout.
29.2 Using SA Monitor
1. Use
the
Refresh function to display active VPN connections.
2. Use
the
Disconnect function to cut off active connections.
Type 2 in Menu 27 - VPN/IPSec Setup, and then press [ENTER] to go to Menu 27.2 - SA Monitor.
Figure 29-1 Menu 27.2 — SA Monitor
Menu 27.2 - SA Monitor
#
Name
Encap.
IPSec ALgorithm
--- -------------------------------- --------- ----------------
001
Taiwan : 3.3.3.1 – 3.3.3.3.100
Tunnel
ESP DES MD5
002
003
004
005
006
007
008
009
010
Select Command= Refresh
Select Connection= N/A
Press ENTER to Confirm or ESC to Cancel: