ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 107)

ZyWALL 100 Internet Security Gateway
10-8 Backup Remote Node Setup
Figure 10-5 Menu 11.4 – Remote Node Setup Script
The following table describes each field in Menu 11.4 – Remote Node Setup Script.
Table 10-3 Remote Node Script Menu Fields
FIELD DESCRIPTION EXAMPLE
Active Press [SPACE BAR] and then [ENTER] to select either Yes to enable
the AT strings or No to disable them. No
(default)
Set 1-6:
Expect Enter an Expect string to match. After matching the Expect string, the
ZyWALL returns the string in the Send field.
Set 1-6:
Send Enter a string to send out after the Expect string is matched. 0.0.0.0
10.5 Remote Node Filter
Move the cursor to the field Edit Filter Sets in menu 11.1, then press [SPACE BAR] to set the value to
Yes. Press [ENTER] to open Menu 11.5 - Remote Node Filter.
Menu 11.4 - Remote Node Script
Active= No
Set 1: Set 5:
Expect= Expect=
Send= Send=
Set 2: Set 6:
Expect= Expect=
Send= Send=
Set 3:
Expect=
Send=
Set 4:
Expect=
Send=
Enter here to CONFIRM or ESC to CANCEL: