ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 259)

ZyWALL 100 Internet Security Gateway
24-2 Remote Management
24.3 Web
You can use the ZyWALL’s embedded web configurator for configuration and file management. See the
Using the ZyWALL Web Configurator chapter for an introduction to the web configurator.
24.4 SNMP
Simple Network Management Protocol is a protocol used for exchanging management information between
network devices. Your ZyWALL supports SNMP agent functionality, which allows a manager station to
manage and monitor the ZyWALL through the network. Refer to the SNMP chapter for more information.
24.5 DNS
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa,
for example, the IP address of www.zyxel.com is 204.217.0.2. Refer to the Internet Access chapter for
more information.
24.6 Remote Management
Remote management control is for managing Telnet, Web and FTP services. You can customize the service
port, access interface and the secured client IP address to enhance security and flexibility.
You may manage your ZyWALL from a remote location via:
Internet (WAN only) ALL (LAN and WAN)
LAN only, Neither (Disable).
Choosing WAN only or ALL (LAN & WAN) automatically creates a hole in the
firewall for the server type specified.
To disable remote management of a service, select Disable in the corresponding Server Access field.
Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.