ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 161)

ZyWALL 100 Internet Security Gateway
Using the ZyWALL Web Configurator 15-1
Chapter 15
Using the ZyWALL Web Configurator
This chapter shows you how to configure your firewall with the web configurator.
15.1 Web Configurator Login and Main Menu Screens
Use the ZyWALL web configurator, to configure your firewall. To get started, follow the steps shown next.
Step 1. Launch your web browser and enter 192.168.1.1 as the URL.
Step 2. Enter "1234" (default) as the password and click Login. If a password appears automatically, just
click Login. You should see a screen asking you to change your password (highly recommended).
Step 3. Either enter a new password (and retype it to confirm) and click Login or click Ignore to display
the MAIN MENU screen.
Use the Help icon in the web configurator for explanations of the fields.
If you forget your password, refer to the Resetting the ZyWALL section to see how to reset the default
configuration file.
15.2 Enabling the Firewall
Click Advanced, Firewall and then the Summary tab. Enable (or activate) the firewall by clicking the
Enable Firewall check box as seen in the following screen.