ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 43)

ZyWALL 100 Internet Security Gateway
3-2 Initial Setup
Figure 3-2 Password Screen
3.2 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
Table 3-1 Main Menu Commands
OPERATION KEYSTROKES DESCRIPTION
Move down to
another menu [ENTER] To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
Move up to a
previous menu [ESC] Press the [ESC] key to move back to the previous menu.
Move to a
“hidden” menu Press [SPACE BAR]
to change No to Yes
then press [ENTER]. Fields beginning with “Edit” lead to hidden menus and have a
default setting of No. Press [SPACE BAR] to change No to Yes,
and then press [ENTER] to go to a “hidden” menu.
Move the cursor [ENTER] or
[UP]/[DOWN] arrow
keys
Within a menu, press [ENTER] to move to the next field. You can
also use the [UP]/[DOWN] arrow keys to move to the previous and
the next field, respectively.
Entering
information Fill in, or press
[SPACE BAR], then
press [ENTER] to
select from choices. You need to fill in two types of fields. The first requires you to type
in the appropriate information. The second allows you to cycle
through the available choices by pressing [SPACE BAR].
Required fields All fields with the symbol must be filled in order be able to
save the new configuration.
N/A fields Some of the fields in the SMT will show a . This symbol
refers to an option that is Not Applicable.
Save your
configuration [ENTER] Save your configuration by pressing [ENTER] at the message
“Press ENTER to confirm or ESC to cancel”. Saving the data on
the screen will take you, in most cases to the previous menu.
Enter Password : XXXX