ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 254)

ZyWALL 100 Internet Security Gateway
System Maintenance & Information 23-5
Table 23-2 Call History Fields
FIELD DESCRIPTION
Phone Number The PPPoE service names are shown here.
Dir This shows whether the call was incoming or outgoing.
Rate This is the transfer rate of the call.
#call This is the number of calls made to or received from that telephone number.
Max This is the length of time of the longest telephone call.
Min This is the length of time of the shortest telephone call.
Total This is the total length of time of all the telephone calls to/from that telephone number.
You may enter an entry number to delete it or ‘”0” to exit.
23.3 Time and Date Setting
The ZyWALL has a Real Time Chip (RTC) that keeps track of the time and date. There is also a software
mechanism to set the time manually or get the current time and date from an external server when you turn
on your ZyWALL. Menu 24.10 allows you to update the time and date settings of your ZyWALL. The real
time is then displayed in the ZyWALL error logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Figure 23-6 Menu 24 — System Maintenance
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call
Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: