ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 72)

ZyWALL 100 Internet Security Gateway
LAN Setup 6-13
Figure 6-9 Menu 3.5.1 - WLAN MAC Address Filter
Table 6-7 Menu 3.5.1 - WLAN MAC Address Filter
FIELD DESCRIPTION DEFAULT
Active Press the [SPACE BAR] to select Yes to make the wireless LAN
MAC address filter active. No
Filer Action Press the [SPACE BAR] to select Allowed Association or Deny
Association for the MAC addresses in the Address fields.
Select Allowed Association to permit access to the ZyWALL,
MAC addresses not listed will be denied access to the ZyWALL.
Select Deny Association to disallow access to the ZyWALL,
MAC addresses not listed will be allowed to access the ZyWALL.
Allowed
Association
MAC Address
Filter
Address 1 ~ 12
Enter the MAC addresses of the client computers that are
allowed or denied access to the ZyWALL in these Address
fields.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.
Menu 3.5.1 - WLAN MAC Address Filter
Active= Yes
Filter Action= Allowed Association
MAC Address Filter
Address 1= 00:60:b3:f1:f5:df
Address 2= 00:00:00:00:00:00
Address 3= 00:a0:c5:15:0f:be
Address 4= 00:00:00:00:00:00
Address 5= 00:00:00:00:00:00
Address 6= 00:00:00:00:00:00
Address 7= 00:00:00:00:00:00
Address 8= 00:00:00:00:00:00
Address 9= 00:00:00:00:00:00
Address 10= 00:00:00:00:00:00
Address 11= 00:00:00:00:00:00
Address 12= 00:00:00:00:00:00
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.