ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 100)

ZyWALL 100 Internet Security Gateway
Backup Remote Node Setup 10-1
Chapter 10
Backup Remote Node Setup
This chapter shows you how to configure a remote node for a dial-backup connection.
10.1 Remote Node Profile (Backup ISP)
Enter 2 in Menu 11 Remote Node Setup to open Menu 11.1 Remote Node Profile (Backup ISP) (shown
below) and configure the setup for your Dial Backup port connection.
Figure 10-1 Menu 11.1 Remote Node Profile (Backup ISP)
Table 10-1 Fields in Menu 11.1 Remote Node Profile (Backup ISP)
FIELD DESCRIPTION EXAMPLE
Rem Node
Name Enter a descriptive name for the remote node. This field can be up to
eight characters. LAoffice
Active Press [SPACE BAR] and then [ENTER] to select Yes to enable the
remote node or No to disable the remote node. Yes
Menu 11.1 - Remote Node Profile (Backup ISP)
Rem Node Name= ? Edit PPP Options= No
Active= Yes Rem IP Addr= 0.0.0.0
Edit IP= No
Outgoing: Edit Script Options= No
My Login=
My Password= ******** Telco Option:
Authen= CHAP/PAP Allocated Budget(min)= 0
Pri Phone #= ? Period(hr)= 0
Sec Phone #= Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel: