ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 44)

ZyWALL 100 Internet Security Gateway
Initial Setup 3-3
OPERATION KEYSTROKES DESCRIPTION
Exit the SMT Type 99, then press
[ENTER]. Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
3.2.1 Main Menu
After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
Figure 3-3 ZyWALL Main Menu
3.2.2 System Management Terminal Interface Summary
Table 3-2 Main Menu Summary
NO. MENU TITLE FUNCTION
1 General Setup Use this menu to set up dynamic DNS and administrative information.
2 WAN Setup Use this menu to clone a MAC address from a computer on your LAN and
configure the backup WAN dial-up connection.
3 LAN Setup Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings and configure the wireless LAN port.
4 Internet Access Setup Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
5 DMZ Setup Use this menu to configure your public servers connected to the DMZ
port.
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ZyWALL 100 Main Menu
Getting Started Advanced Management
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
5. DMZ Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
25. IP Routing Policy
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
Enter Menu Selection Number: