ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 269)

ZyWALL 100 Internet Security Gateway
25-6 IP Policy Routing
25.5 Applying an IP Policy
This section shows you where to apply the IP policies after you design them.
25.5.1 Ethernet IP Policies
From Menu 3 – Ethernet Setup, type 2 to go to Menu 3.2 – TCP/IP and DHCP Ethernet Setup.
You can choose up to four IP policy sets (from 12) by typing their numbers separated by commas, for
example, 2, 4, 7, 9.
Figure 25-6 Menu 3.2 — TCP/IP and DHCP Ethernet Setup
25.6 IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the Internet
using one policy and route FTP packets to a remote network using another policy. See the next figure.
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
DHCP Server Address= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
IP Policies= 2,4,7,9
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Type IP Policy
sets, separated
by commas.