ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 101)

ZyWALL 100 Internet Security Gateway
10-2 Backup Remote Node Setup
FIELD DESCRIPTION EXAMPLE
Outgoing
My Login Enter the login name assigned by your ISP for this remote node. jim
My Password Enter the password assigned by your ISP for this remote node. *****
Authen This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when
requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
CHAP/PAP
Pri Phone #
Sec Phone #
Enter the first (primary) phone number from the ISP for this remote
node. If the Primary Phone number is busy or does not answer, your
ZyWALL dials the Secondary Phone number if available. Some areas
require dialing the pound sign # before the phone number for local
calls. Include a # symbol at the beginning of the phone numbers as
required.
Edit PPP
Options Move the cursor to this field and use the space bar to select [Yes] and
press [Enter] to edit the PPP options for this remote node. This brings
you to Menu 11.2 - Remote Node PPP Options (see the Editing PPP
Options section). No
(default)
Rem IP Addr Leave the field set to 0.0.0.0 (default) if the remote gateway has a
dynamic IP address. Enter the remote gateway’s IP address here if it
is static. 0.0.0.0
(default)
Edit IP This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes
and press [ENTER] to go to Menu 11.3 - Remote Node Network
Layer Options. See the Editing TCP/IP Options section for more
information. No
(default)
Edit Script
Options Press [SPACE BAR] to select Yes and press [ENTER] to edit the AT
script for the dial backup remote node (Menu 11.4 - Remote Node
Script). See the Editing Login Script section for more information. No
(default)
Telco Option
Allocated
Budget
Enter the maximum number of minutes that this remote node may be
called within the time period configured in the Period field. The default
for this field is 0 meaning there is no budget control and no time limit
for accessing this remote node. 0
(default)
Period(hr) Enter the time period (in hours) for how often the budget should be
t F l t ll ll t thi t d f i
0
(d f lt)