ZyXEL Communications Internet Security Gateway ZyWALL 100 - Manual (Page 71)

ZyWALL 100 Internet Security Gateway
6-12 LAN Setup
FIELD DESCRIPTION EXAMPLE
hexadecimal digits ("0-9", "A-F") preceded by 0x for each Key (1-4).
If you chose 128-bit WEP, then enter 13 characters (ASCII string) or 26
hexadecimal digits ("0-9", "A-F") preceded by 0x for each Key (1-4).
There are four data encryption keys to secure your data from
eavesdropping by unauthorized wireless users. The values must be set up
exactly the same on the Access Points as they are on the wireless client
stations. The same value must be assigned to Key 1 on both the Access
Point and the client adapters, the same value must be assigned to Key 2 on
both the Access Point and the client stations and so on, for all four WEP
keys.
Edit MAC
Address Filter Press [SPACE BAR] once to select Yes to go to Menu 3.5.1 - WLAN MAC
Address Filter discussed next. No
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.
The ZyWALL LAN Ethernet and wireless ports can transparently communicate with
each other (transparent bridge).
6.5.1 WLAN MAC Address Filter
In Menu 3.5- Wireless LAN Setup press the [SPACE BAR] once in the Edit MAC Address Filter field to
select Yes and go to Menu 3.5.1 - WLAN MAC Address Filter.
A client computer is identified by the (unique) MAC address of its wireless LAN card. Program the
ZyWALL (the AP) with a list of MAC addresses associated with the client computers allowed or denied
access to the AP.