Zoom MRS-1266 - Manual (Page 91)

Reference [Rhythm]
ZOOM MRS-1266
91
pattern will play repeatedly. If you shorten the rhythm
pattern, the song will switch to the next rhythm pattern
before the current pattern has finished playing.
H INT
This operation will not affect the original rhythm pattern.
7.
To finalize the selected rhythm pattern, press the
[ENTER] key.
The rhythm pattern data will be input at the current location.
(The “EOS” indication is moved back by the number of
input measures.)
H INT
When rhythm pattern data is input, information other than
tempo will be input at the same location in the rhythm song.
8.
Repeatedly press the cursor right key to move to
the location at which you will input the next rhythm
pattern.
Each time you press a cursor left/right key, the current
location will move one measure backward or forward. When
you advance to the end of the rhythm song, the display will
indicate “EOS”.
9.
Repeat this procedure to input rhythm patterns for
the entire song.
10.
When input for one rhythm song is completed,
press the STOP [ P ] key.
The REC [ O ] key goes out, and the unit returns to the
rhythm song screen. If you wish to check the input result,
press the PLAY [ R ] key.
11.
To return to the main screen, press the [EXIT] key
while the rhythm section is stopped.
To edit an input rhythm pattern, perform the following steps
while the REC [ O ] key is lit.
■ To re-select a pattern that you input
Use the cursor left/right keys to move to the desired rhythm
pattern data, and turn the dial to select a new pattern.
If you go to a point where no pattern information is input
(display shows “ PTN”), you can add rhythm pattern
information to that point.
N OTE
Keep in mind that the newly added rhythm pattern
information will remain valid until the next point where rhythm
pattern information is input.
■ To insert a new pattern
Use the cursor left/right keys to move to the location at
which you want to insert rhythm pattern data, and execute
steps 4 - 7. The rhythm pattern data will be inserted at the
current location, and subsequent rhythm pattern data will be
moved backward according to the length of that pattern.
■ To delete rhythm pattern data
Use the cursor left/right keys to move to the location at
which you want to erase rhythm pattern data, and press the
[DELETE/ERASE] key. The rhythm pattern data will be
deleted, and the display will change to “ PTN”, indicating
that the preceding pattern will continue playing.
PTN:002 PTN:002
08Beat03
08Beat03
001- 1 001- 1
0 0
PTN PTN
EOS
EOS
å
003- 1 003- 1
0 0
PATTERN A PATTERN B PATTERN C
PATTERN D
PATTERN A PATTERN B PATTERN C PATTERN D
Insert
Delete
PATTERN A PATTERN B PATTERN C PATTERN D
PATTERN D PATTERN A PATTERN B