beautypg.com

Songno0e songno0e empty empty ev evå eos eos, Ptn ptn eos eos е – Zoom MRS-1266 User Manual

Page 23

background image

Quick Tour

ZOOM MRS-1266

23

1.

Verify that the [DRUM]/[BASS] status keys are lit.

Then set the [DRUM], [BASS], and [MASTER]

faders to the 0 (dB) position.

If the [DRUM]/[BASS] status keys are out, press them to

turn them on.

The drum sound and bass sound of the rhythm section are

sent to the respective faders which function as an internal

mixer. Use the [DRUM]/[BASS] status keys to turn the

respective sound on or off, and use the [DRUM]/[BASS]

faders to adjust the level.

2.

Press the [SONG] key in the rhythm section.

The indication "SongNo0E EMPTY" appears on the display.

The rhythm section can operate in "pattern mode" or "song

mode". Use the [SONG] key and [PATTERN] key in the

rhythm section to switch between the two modes.

When the indication "SongNox" (where x is the song

number) is shown on the display, the rhythm section operates

in song mode.

H

INT

Immediately after pressing the [SONG] key or [PATTERN]

key, the [RHYTHM] key in the display section flashes.

3.

Press the [RHYTHM] key in the display section.

The [RHYTHM] key stops flashing and stays constantly lit.

The rhythm section is no longer linked to the recorder

section and can be operated independently (referred to as

“rhythm machine mode”).

When the rhythm section is in this condition, rhythm

patterns and rhythm songs can be programmed and edited.

4.

Press the REC [

O

] key.

The REC [

O

] key lights up and rhythm patterns, chords, and

other information can be input into the rhythm song. The

counter in the bottom right corner of the display shows the

current position (measure/beat).

5.

Use the cursor up/down keys to bring up the

indication "

PTN" on the display.

Normally, the second line of the display in this mode shows

the number of the pattern entered at the current position.

However, for an empty rhythm song there will be no rhythm

pattern information. Therefore the indication "EOS" (End of

Song) is shown instead of the pattern number.

6.

Press the [INSERT/COPY] key in the rhythm section.

The indication "INSERT?" appears on the first line of the

display, and the rhythm pattern number and the number of

measures are shown on the second line.

0dB

0dB

Lit

SongNo0E

SongNo0E
EMPTY

EMPTY

EV

EVå
EOS

EOS

001- 1

001- 1

0

0

Tick

Current position

PTN

PTN
EOS

EOS

е