Zoom MRS-1266 - Manual (Page 38)

Reference [Recorder]
ZOOM MRS-1266
38
Using V-takes
Each track 1 - 10 of the recorder contains ten virtual tracks,
called "V-takes". For each track, you can select one take,
which will be used for recording and playback. For example,
you can switch V-takes as you record multiple vocal or guitar
solos on the same track, and later compare them and select
the best V-take.
Switching V-takes
Here's how to switch the V-take used by each track 1 - 10.
1.
From the main screen, press the [V-TAKE] key in
the track parameter section.
The [V-TAKE] key lights up, and the track number, V-take
number, and V-take name appear on the display.
H INT
If you select a V-take on which nothing is recorded, the indi-
cation "NO DATA" appears.
The level meter display area will show dots as lit (recorded V-
take) and out (unrecorded V-take).
Flashing dots means the V-take currently selected for each
track. (recorded/unrecorded V-takes blinks synchronously.)
2.
Use the cursor left/right keys to select a track.
H INT
You can also select the track with the status keys (1 - 8, 9/10,
[MASTER]). For tracks 9/10, the track is toggled between 9
and 10 with each push of the status key.
3.
Turn the dial to select the V-take.
H INT
For tracks 9/10, you can select a different V-take for each
track.
4.
Repeat steps 2 - 3 as necessary, to select a V-take
for each track.
5.
When you have finished selecting V-takes, press
the [EXIT] key.
The [V-TAKE] key goes out, and the unit returns to the main
screen.
Editing V-take names
A V-take that has been recorded will be automatically
assigned a default name, according to the following pattern.
• DULxx-yy
V-take recorded through DUAL algorithm insert effect
1
1
2
3
4
5
6
7
8
9
10
2
V-takes
3 4 5 6 7 8 9/10
Track
V-take currently selected
for each track 1 - 10
TR 3- 2 TR 3- 2
GTR 3- 2
GTR 3- 2
1
2
3
4
5
6
7
8
9
10
V-take Lit: recorded V-take
Out: unrecorded V-take
Flashing: currently selected V-take
Track
TR 2- 1 TR 2- 1
GTR 2- 1
GTR 2- 1
Reference [Recorder]