Zoom MRS-1266 - Manual (Page 30)

Quick Tour
ZOOM MRS-1266
30
H INT
If you want to record without sending the sound through the
insert effect, press the [BYPASS] key from the main screen.
This will bypass the insert effect. When you press the [BY-
PASS] key once again it will go out, and bypass will be dis-
abled.
3.3 Selecting a track and recording
Now we will record the sound (with the insert effect applied)
on a track.
1.
If necessary, readjust the recording level with the
[REC LEVEL] control while playing your
instrument.
By default, the insert effect is inserted before the [REC
LEVEL] control. For this reason, the recording level may
change if you change the insert effect patch.
2.
With the recorder stopped, repeatedly press the
status key for the chosen track (1 - 8, 9/10) so that
the key lights up in red.
Status keys 1 - 8 and 9/10 are used to switch channel-muting
on/off and to select the recording track. Each time you press
a status key, the key will cycle through the following states:
● Lit green (mute off)
● Out (mute on)
● Lit red (selected as the recording track)
When the status key is red, the input signal routing will
change as follows.
If you want to record a stereo source, select the recording
tracks by one of the following methods.
● Recording on stereo tracks (tracks 9/10)
Press the status key for tracks 9/10) until the key is lit in red.
The signal from the jack with the lower number is recorded
on track 9, and the other signal on track 10.
● Stereo recording on tracks 1 - 8
Press the status keys for tracks 1/2, 3/4, 5/6, or 7/8
simultaneously until the keys are lit in red. The signal from
the jack with the lower number is recorded on the odd-
numbered track and the other signal on the even-numbered
track.
● Mono recording on tracks 1 - 8
Press the status key for one of tracks 1 - 8 until the key is lit
in red. The stereo channels are mixed and recorded on this
single track.
H INT
Normally, only two mono tracks or one stereo track can be
recorded simultaneously. By activating the 6TR REC mode,
the signal from INPUTS 1 - 6 can be recorded on six tracks
simultaneously. For details, see page 47.
3.
Press the PLAY [ R ] key, and while listening to the
rhythm song, operate the fader of the selected
track to adjust the monitor level of the input signal.
MASTER
MASTER
1
Track 1
Track 2
Track 3
Track 1
Track 2
Track 3
When a recording track (track 1) has been selected
When a recording track has not been selected
Monitor
Monitor