Zoom MRS-1266 - Manual (Page 152)

Reference [MIDI]
ZOOM MRS-1266
152
6.
To select the MIDI channel to be assigned to the
internal bass program, use the cursor left/right
keys to bring up the indication “SMF ChToBass” on
the display, and press the [ENTER] key.
7.
Turn the dial to select one of the settings listed
below, and press the [EXIT] key.
● OFF
No SMF playing information is sent to the bass program.
● 1 - 16
The playing information of the selected MIDI channel is
sent to the bass program and not to the MIDI OUT
connector.
H INT
The factory default setting is “9” (MIDI channel 9).
8.
To return to the main screen, press the [EXIT] key
several times.
SMF playback
You can select any SMF imported into a project and play it
as follows.
1.
From the main screen, press the [UTILITY/TRACK
EDIT] key in the display section.
The utility menu appears.
2.
Use the cursor left/right keys to bring up the
indication “UTILITY SMF” on the display, and press
the [ENTER] key.
The indication “SMF IMPORT” appears on the display.
3.
Use the cursor left/right keys to bring up the
indication “SMF FILE SEL” on the display.
4.
Press the [ENTER] key.
The display changes as follows, allowing you to select an
imported SMF for playback.
5.
Turn the dial to select the SMF, and press the [EXIT]
key.
The file is selected, and the display returns to the condition
of step 3.
6.
To return to the main screen, press the [EXIT] key
several times.
7.
To play the SMF, press the PLAY [ R ] key.
The SMF is played in conjunction with the recorder section/
rhythm section.
N OTE
• When playing an SMF, the recorder section/rhythm section
will always be activated, regardless of the [RHYTHM] key
status (on/off).
• The beat information contained in the SMF is disregarded.
Locating a measure/beat in the song of the MRS-1266
may therefore lead to a mismatch with the measure/beat
of the SMF.
ChToBass ChToBass
9CH
9CH
SMF SMF
FILE SEL
FILE SEL
FILE SEL FILE SEL
SEQ1
SEQ1