Zoom MRS-1266 - Manual (Page 147)

Reference [MIDI]
ZOOM MRS-1266
147
Making MIDI-related settings
This section explains how to make MIDI-related settings.
The procedure is the same for most settings. The basic steps
are as follows.
Basic procedure
1.
Press the [RHYTHM] key, and then press the
[UTILITY/TRACK EDIT] key.
The rhythm utility menu for making various rhythm section
settings appears
2.
Use the cursor left/right keys to bring up the
indication “UTILITY MIDI” on the display.
3.
Press the [ENTER] key.
Now you can select MIDI-related setting items.
4.
Use the cursor left/right keys to select one of the
following items, and press the [ENTER] key.
●
DRUM CH
Set the MIDI channel of the drum track.
●
BASS CH
Set the MIDI channel of the bass track.
●
SPP
Turn Song Position Pointer transmission on/off.
●
COMMAND
Turn Start/Stop/Continue message transmission on/off.
●
CLOCK
Turn Timing Clock transmission on/off.
●
PRG CHG
Turn Program Change transmission on/off.
5.
Press the [ENTER] key to display the setting of the
selected item, and turn the dial to change the
setting.
For details on each item, refer to the following explanation.
N OTE
Operation steps related to SMF are explained on page 150.
H INT
Because transmission and reception of Control Change
messages is always enabled, there is no parameter for this
item. For a list of supported Control Change messages, see
the appendix at the end of this manual.
6.
When you have finished making settings, press the
[EXIT] key several times.
The unit returns to the main screen.
UTILITY UTILITY
MIDI
MIDI
MIDI MIDI
DRUM CH
DRUM CH