Zoom MRS-1266 - Manual (Page 128)

Reference [Effects]
ZOOM MRS-1266
128
Importing patches from another
project
This section explains how to import (load) all patches for the
internal effects (insert effect and send/return effect) from
another project that is already saved on the hard disk.
1.
Press the [EFFECT] key in the display section.
N OTE
Keep in mind that importing patches in this way will overwrite
all patches in the current project. Take care not to
accidentally erase patches that you wish to keep.
2.
Press the [UTILITY/TRACK EDIT] key.
The indication “UTILITY Import” appears on the display.
3.
Press the [ENTER] key.
In this condition, you can select the project from which to
import.
4.
Turn the dial to select the import source project,
and press the [ENTER] key.
The indication “Import SURE?” appears on the display.
5.
To carry out the import process, press the [ENTER]
key once more. To cancel the process, press the
[EXIT] key.
The patches of the selected project are imported into the
current project. When the import process is completed, the
screen of step 1 appears again.
12 12
Import Import
PRJ012
PRJ012
Project name Project number