Zoom MRS-1266 - Manual (Page 53)

Reference [Recorder]
ZOOM MRS-1266
53
playback length setting to flash, and turn the dial.
You can select 40, 80, 120, 160, or 200 (ms) as the length of
scrub playback.
H INT
You can also use the cursor up/down keys to change the
scrub playback length.
3.
If you want to change the direction of scrub
playback, use the cursor left/right keys to cause
the scrub playback direction indication to flash,
and turn the dial.
If you select "TO", scrub playback will begin from an earlier
point and end at the current location. If you select "FRM",
scrub playback will begin from the current location (this is
the default setting).
H INT
Any change you make to the scrub settings will take effect
immediately.
4.
If you want to use the new scrub playback settings
to find a location, use the cursor left/right keys to
move the flashing area to the unit displayed on the
counter ("MS" for time display, or "TICK" for
measure display).
5.
Turn the dial to the left or right to move the current
location.
During scrub playback, the current location can be moved
forward or backward in milliseconds or ticks.
6.
To exit the scrub function, press the STOP [ P ] key.
The unit returns to the main screen.
Current location Current location
(Default setting)
Scrub playback Scrub playback