Zoom MRS-1266 - Manual (Page 110)

Reference [Rhythm]
ZOOM MRS-1266
110
6.
Use the cursor left/right keys to bring up the
indication “EDIT Bs Level” on the display, and
press the [ENTER] key.
This screen allows you to specify the bass track volume.
The display shows the current volume setting (0 - 15).
7.
Turn the dial to select the desired setting, and then
press the [EXIT] key.
The setting is accepted, and the rhythm pattern edit menu
appears again.
8.
To return to the main screen, press the [EXIT] key
several times.
Copying a rhythm pattern
You can copy a rhythm pattern to another pattern number.
This is useful if you want to create variations of a rhythm
pattern.
1.
From the main screen, press the [PATTERN] key so
that the key lights up.
The rhythm section goes into rhythm pattern mode, and the
[RHYTHM] key flashes.
2.
Press the [RHYTHM] key.
3.
Press the [INSERT/COPY] key.
A screen for selecting the copy destination appears. An
empty pattern is listed as “E”.
4.
Turn the dial to select the number of the rhythm
pattern to use as copy destination, and press the
[ENTER] key.
5.
To execute the copy process, press the [ENTER]
key. To cancel, press the [EXIT] key.
When you press the [ENTER] key, the copy will be
executed, and the display returns to the rhythm pattern
selection screen, with the copy destination rhythm pattern as
the selected pattern.
If the copy destination rhythm pattern contains any
information, this will be overwritten.
6.
To return to the main screen, press the [EXIT] key
several times.
Editing the name of a rhythm pattern
This section explains how to edit the name of a rhythm
pattern.
1.
From the main screen, press the [PATTERN] key so
that the key lights up.
The rhythm section goes into rhythm pattern mode, and the
[RHYTHM] key flashes.
2.
Turn the dial to select the pattern and press the
[RHYTHM] key.
The [RHYTHM] key flashes, and a rhythm pattern can be
created or edited.
3.
Press the [EDIT] key.
The rhythm pattern edit menu appears on the display.
4.
Use the cursor left/right keys to bring up the
indication “EDIT Name” on the display, and press
the [ENTER] key.
The rhythm pattern name is shown, and the first character
flashes.
5.
Use the cursor left/right keys to move the flashing
position to the character you want to change, and
turn the dial to select a character.
For information on available characters, refer to page 39.
Bs Level Bs Level
15
15
COPY COPY
0
0å 1 1
EDIT EDIT
Quantize
Quantize
Name Name
Pat10
Pat10