Zoom MRS-1266 - Manual (Page 115)

Reference [Rhythm]
ZOOM MRS-1266
115
• MIDI
Make MIDI-related settings ( → p. 146).
• Import
Import rhythm patterns and the rhythm song from a project
saved on the hard disk ( → p. 114).
• Memory
Check the remaining amount of rhythm pattern and rhythm
song memory.
5.
Turn the dial to edit the setting.
The screen display and operation will be different for each
item. For details refer to the sections that follow.
H INT
For details on MIDI operations, refer to page 146. For details
on the Import procedure, refer to the preceding section.
6.
When the setting procedure is complete, press the
[EXIT] key several times.
The unit returns to the main screen.
Changing the length of the pre-count
You can change the length of the pre-count that is heard
when you record a rhythm pattern. Select “Count” from the
rhythm utility menu and press the [ENTER] key. Then turn
the dial to choose one of these settings.
• OFF
The pre-count is turned off.
• 1
A one-measure pre-count is heard (default setting).
• 2
A two-measure pre-count is heard.
• PAD
The pre-count is off, and recording will begin at the instant
you tap a pad.
Changing the metronome volume
You can change the volume of the metronome that is heard
when you record a rhythm pattern in real time. Select
“ClickVol” from the rhythm utility menu and press the
[ENTER] key. Then turn the dial to choose the settings (0 -
15).
Adjusting the sensitivity of the pads
You can specify the volume that is produced by the force
with which you tap the pads (pad sensitivity). Select
“PadSens” from the rhythm utility menu and press the
[ENTER] key. Then turn the dial to choose one of these
settings.
• SOFT
The volume will be soft, regardless of how strongly you tap.
• MEDIUM
The volume will be medium, regardless of how strongly you
tap.
• LOUD
The volume will be loud, regardless of how strongly you tap.
• LITE
Maximum sensitivity. Even light taps will produce a loud
volume.
• NORMAL
Normal sensitivity (default setting).
• HARD
Low sensitivity. Strong tapping is needed to produce a loud
volume.
•EX HARD
Lowest sensitivity. Very strong tapping is needed to produce
a loud volume.
Count Count
1
ClickVol ClickVol
10
10
Pad Sens Pad Sens
NORMAL
NORMAL