Zoom MRS-1266 - Manual (Page 167)

Appendix
ZOOM MRS-1266
167
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4 TYPE
CHORUS
FLANGER
PHASER
TREMOLO
PDL-WAH
AutoWah
PITCH
RingMod
EXCITER
AIR
WIDE
DELAY
Stereo chorus with clear sound and great spaciousness.
An effect that adds a pronounced character and modulation to the sound.
An effect that adds a swooshing modulation to the sound.
An effect that cyclically varies the volume.
An effect that lets you use an expression pedal to control wah manually.
An effect in which wah is applied according to your playing dynamics.
An effect that modifies the pitch of the original sound.
An effect that produces a metallic resonance.
An effect that gives the sound more focus and spatial definition.
Simulates the effect of air on the room resonance, giving the sound spatial depth.
An effect that produces the sound of a stereo recording made with two mics.
A delay effect with a maximum of 500 mSec.
DEPTH
DEPTH
POSITION
DEPTH
POSITION
FLT TYPE
SHIFT
POSITION
FREQ
SIZE
TIME
TIME
MODULATION/DELAY MODULE
PARAMETER 1 PARAMETER 2 PARAMETER 3 PARAMETER 4 TYPE
3BandEQ
HIGH MID LOW LEVEL
Three-band equalizer.
EQ MODULE
-12 – 12
-12 – 12
-12 – 12
1 – 8
Boosts/cuts the high-frequency range.
Boosts/cuts the mid-frequency range.
Boosts/cuts the low-frequency range.
Sets the output level of the module. HIGH
MID
LOW
LEVEL
PARAMETER 1 TYPE
ZNR
THRSHOLD
Zoom's proprietary noise reduction that minimizes noise when you are not playing.
ZNR MODULE
PARAMETER 1 TYPE
VOL PDL
MIN VOL
You can use an expression pedal to control the volume.
VOL PDL MODULE
RATE
RATE
RATE
RATE
FREQ
POSITION
TONE
RATE
DEPTH
TONE
WET LVL
FB
MIX
FB
COLOR
CLIP
LEVEL
RESO
BALANCE
BALANCE
LowBoost
MIX
DRY LVL
MIX
--
--
--
--
RTM
SENS
--
--
--
--
--
--
0 – 10
1 – 30
0 – 30
TYPE = FLANGER : -10 – 10
TYPE = DELAY : 0 – 10
AF / bF
1 – 4
0 – 10
TYPE = PDL-WAH : 1 – 50
TYPE = EXCITER : 1 – 5
1 – 8
OFF / On
bPF / LPF
1 – 10
-10 – 10
-12.0 – 24.0
0 – 10
0 – 30
0 – 10
1 – 10
TYPE = WIDE : 1 – 64
TYPE = DELAY : 1 – 50
0 – 30
0 – 30
Adjusts the depth of the effect.
Adjusts the speed of the effect.
Adjusts the mix amount of the effect.
Adjusts the amount of feedback.
Exchanges the effect locations of the DRIVE module and MOD module.
Changes the type of the phase tone.
Emphasizes the effect.
Specifies the center frequency of the wah.
Specifies the frequency.
Sets the output level of the module.
Specifies whether the expression pedal will be used as a wah pedal.
Specifies the type of filter.
Adds character to the sound.
Adjusts the sensitivity with which the effect is applied.
Sets the amount of shift produced by the pitch shifter.
Adjust the tone.
Adjusts the balance between the direct sound and effect sound.
Emphasizes the low-frequency range.
Specifies the spatial width.
Sets the delay time.
Adjusts the mix amount of the effect sound.
Adjusts the mix amount of the direct sound.
DEPTH
RATE
MIX
FB
POSITION
COLOR
CLIP
FREQ
LEVEL
RTM
FLT TYPE
RESO
SENS
SHIFT
TONE
BALANCE
LowBoost
SIZE
TIME
WET LVL
DRY LVL
Explanation of MODULATION/DELAY MODULE parameters
Explanation of EQ MODULE parameters
Range Explanation of parameter Parameter name
*For an explanation of the parameters, refer to the DUAL algorithm.
Range Explanation of parameter Parameter name