ZyXEL Communications P-335WT - Manual (Page 99)

P-335 Series User’s Guide
Chapter 7 Wireless LAN (P-335WT) 99
4 If you have OTIST-enabled clients, configure OTIST in the OTIST screen. OTIST
transfers device SSID and WEP or WPA-PSK key settings (if enabled) to wireless
clients.
The following figure shows the relative effectiveness of these wireless security methods
available on your Prestige.
Figure 31 Prestige Wireless Security Levels
Note: You must enable the same wireless security settings on the Prestige and on all
wireless clients that you want to associate with it.
7.4 Configuring the Wireless Screen
Note: If you are configuring the Prestige from a computer
connected to the wireless LAN and you change the Prestige’s
SSID or WEP settings, you will lose your wireless connection
when you press Apply to confirm. You must then change the
wireless settings of your computer to match the Prestige’s new
settings.
Click the WIRELESS link under ADVANCED to open the Wireless screen.