ZyXEL Communications P-335WT - Manual (Page 463)

P-335 Series User’s Guide
Appendix G Log Descriptions 463
Appendix G
Log Descriptions
Configure centralized logs using the embedded web configurator; see online help for details.
This appendix provides descriptions of example log messages.
Table 159 System Error logs
LOG MESSAGE DESCRIPTION
%s exceeds the max. number
of session per host! This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
Table 160 System Maintenance Logs
LOG MESSAGE DESCRIPTION
Time calibration is
successful The router has adjusted its time based on information from the
time server.
Time calibration failed The router failed to get information from the time server.
DHCP client gets %s A DHCP client got a new IP address from the DHCP server.
DHCP client IP expired A DHCP client's IP address has expired.
DHCP server assigns %s The DHCP server assigned an IP address to a client.
SMT Login Successfully Someone has logged on to the router's SMT interface.
SMT Login Fail Someone has failed to log on to the router's SMT interface.
WEB Login Successfully Someone has logged on to the router's web configurator
interface.
WEB Login Fail Someone has failed to log on to the router's web configurator
interface.
TELNET Login Successfully Someone has logged on to the router via telnet.
TELNET Login Fail Someone has failed to log on to the router via telnet.
FTP Login Successfully Someone has logged on to the router via ftp.
FTP Login Fail Someone has failed to log on to the router via ftp.
NAT Session Table is Full! The maximum number of NAT session table entries has been
exceeded and the table is full.
!! Phase 1 ID type mismatch The ID type of an incoming packet does not match the local's
peer ID type.
!! Phase 1 ID content
mismatch The ID content of an incoming packet does not match the
local's peer ID content.
!! No known phase 1 ID type
found The ID type of an incoming packet does not match any known
ID type.