ZyXEL Communications P-335WT - Manual (Page 125)

P-335 Series User’s Guide
Chapter 7 Wireless LAN (P-335WT) 125
7.7.1 Activating OTIST
After you click Start, a dialog box displays the security mode and the WEP key or pre-shared
key depending on which mode is configured. Click OK to proceed with the OTIST setup.
Figure 45 OTIST Start
Note: The process takes three minutes. During this time the Prestige assigns its
security settings to OTIST-enabled wireless clients within range that have selected to
associate with this Prestige.
Figure 46 OTIST Process
When the previous screen closes, your current Prestige security configuration is automatically
saved to the wireless clients.
Note: See your wireless client documentation for information on enabling OTIST on it.
If there are multiple OTIST-enabled Prestiges within range and with the same OTIST
setup key, then the wireless client must choose which Prestige should assign its
settings to it.
7.7.2 OTIST button
Use the OTIST button to set up OTIST using the current OTIST Setup Key and the Prestige’s
current wireless security settings.
1 Log out of your current configuration management session.
2 Push the OTIST button once on the back panel of the Prestige device to enable OTIST.