ZyXEL Communications P-335WT - Manual (Page 72)

P-335 Series User’s Guide
72 Chapter 3 Wizard Setup
Figure 16 Wizard Setup : WAN IP and DNS Server Address Assignment
The following table describes the labels in this screen
Table 14 Wizard Setup : WAN IP and DNS Server Address Assignment
LABEL DESCRIPTION
WAN IP Address Assignment
My WAN IP Address Enter the IP address of your Prestige in dotted decimal notation.
If you change the Prestige’s IP address, you must use the new IP address
if you want to access the web configurator again.
Remote IP Address Enter a Remote IP Address appropriate to your network.
Remote IP Subnet Mask Enter the Remote IP Subnet Mask of the neighboring device, if you know
it. If you do not, leave the Remote IP Subnet Mask field as 0.0.0.0.
System DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
computer before you can access it. The Prestige uses a system DNS server (in the order you specify
here) to resolve domain names for VPN, DDNS and the time server.
First DNS Server
Second DNS Server
Third DNS Server
Select From ISP if your ISP dynamically assigns DNS server information
(and the Prestige's WAN IP address). The field to the right displays the
(read-only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the
DNS server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not
configure a system DNS server, you must use IP addresses when
configuring VPN, DDNS and the time server.