ZyXEL Communications P-335WT - Manual (Page 71)

P-335 Series User’s Guide
Chapter 3 Wizard Setup 71
You can configure the WAN port's MAC address by either using the factory default or cloning
the MAC address from a computer on your LAN. Once it is successfully configured, the
address will be copied to the "rom" file (ZyNOS configuration file). It will not change unless
you change the setting or upload a different "rom" file.
Table 12 Example of Network Properties for LAN Servers with Fixed IP Addresses
Choose an IP address 192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.
Subnet mask 255.255.255.0
Gateway (or default route) 192.168.1.1(Prestige LAN IP)
The following wizard screen allows you to assign a fixed IP address or give the Prestige an
automatically assigned IP address depending on your ISP.
Figure 15 Wizard Setup : WAN
The following table describes the labels in this screen
Table 13 Wizard Setup : WAN
LABEL DESCRIPTION
Get automatically from
ISP(default)
Select this option If your ISP did not assign you a fixed IP address. This is
the default selection.
Use fixed IP address Select this option If the ISP assigned a fixed IP address. Select Use fixed
IP address to give the Prestige a fixed, unique IP address. The fixed IP
address should be in the same subnet as your broadband modem or
router.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Select Use fixed IP address in the previous wizard screen and click Next to view the
following screen. Fill in the fields and click Next to continue.