ZyXEL Communications P-335WT - Manual (Page 300)

P-335 Series User’s Guide
300 Chapter 25 Menu 3 LAN Setup
Figure 151 Menu 3.5 Wireless LAN Setup
Menu 3.5 - Wireless LAN Setup
ESSID= Wireless
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
Edit MAC Address Filter= No
Edit Roaming Configuration = No
Preamble= Long
Press ENTER to Confirm or ESC to Cancel:
3 Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR] to
select Yes and then press [ENTER]. Menu 3.5.2 – Roaming Configuration displays as
shown next.
Figure 152 Menu 3.5.2 Roaming Configuration
Menu 3.5.2 - Roaming Configuration
Active= Yes
Port #= 3517
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 104 Roaming Configuration
FIELD DESCRIPTION
Active Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the
Prestige if you have two or more Prestige’s on the same subnet.
Port # Enter the port number to communicate roaming information between access points.
The port number must be the same on all access points. The default is 3517. Make
sure this port is not used by other services.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.