ZyXEL Communications P-335WT - Manual (Page 115)

P-335 Series User’s Guide
Chapter 7 Wireless LAN (P-335WT) 115
7.4.12 Configuring 802.1x and Static WEP Key Exchange
In order to configure and enable 802.1x and Static WEP Key Exchange; click the WIRELESS
link under ADVANCED to display the Wireless screen. Select 802.1x + Static WEP from
the Security list.
802.11 Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to
associate with the Prestige.
Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to
associate with the Prestige.
Select Mixed to allow either IEEE802.11b or IEEE802.11g compliant WLAN
devices to associate with the Prestige. The transmission rate of your Prestige
might be reduced.
G+ Enhanced Select G+ Enhanced checkbox to allow any ZyXEL WLAN devices that support
this feature to associate with the Prestige. This permits the Prestige to transmit at
a higher speed than the 802.11g Only mode.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to reload the previous configuration for this screen.
Table 31 Wireless: 802.1x and Dynamic WEP
LABEL DESCRIPTION