ZyXEL Communications P-335WT - Manual (Page 121)

P-335 Series User’s Guide
Chapter 7 Wireless LAN (P-335WT) 121
7.5 MAC Filter
The MAC filter screen allows you to configure the Prestige to give exclusive access to up to
32 devices (Allow Association) or exclude up to 32 devices from accessing the Prestige (Deny
Association). Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure
this screen.
To change your Prestige’s MAC filter settings, click the WIRELESS link under
ADVANCED and then the MAC Filter tab. The screen appears as shown.
G+ Enhanced Select G+ Enhanced checkbox to allow any ZyXEL WLAN devices that support
this feature to associate with the Prestige. This permits the Prestige to transmit at
a higher speed than the 802.11g Only mode.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to reload the previous configuration for this screen.
Table 33 Wireless: 802.1x and No WEP
LABEL DESCRIPTION