ZyXEL Communications P-335WT - Manual (Page 158)

P-335 Series User’s Guide
158 Chapter 10 Static Route Screens
Figure 65 Static Route
The following table describes the labels in this screen.
Table 50 Static Route
LABEL DESCRIPTION
# Number of an individual static route.
Name Name that describes or identifies this route.
Active This field shows whether this static route is active (Yes) or not (No).
Destination This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway This is the IP address of the gateway. The gateway is an immediate neighbor of
your Prestige that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your Prestige; over the WAN,
the gateway must be the IP address of one of the remote nodes.
Edit Select a static route index number and then click Edit to set up a static route on the
Prestige.
Delete To delete a static route on the Prestige, click a static route index number, then click
Delete.
10.2.1 Configuring Route Entry
Select a static route index number and click Edit. The screen shown next appears. Fill in the
required information for each static route.