ZyXEL Communications P-335WT - Manual (Page 134)

P-335 Series User’s Guide
134 Chapter 8 WAN Screens
8.5 Configuring WAN IP
To change your Prestige’s WAN IP settings, click WAN, then the WAN IP tab. This screen
varies according to the type of encapsulation you select.
If your ISP did not assign you a fixed IP address, click Get automatically from ISP
(Default);otherwise click Use fixed IP Address and enter the IP address in the field provided.
My IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the Prestige.
Server IP Address Type the IP address of the PPTP server.
Connection ID/Name Type your identification name for the PPTP server.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.
Table 40 PPTP Encapsulation
LABEL DESCRIPTION