ZyXEL Communications P-335WT - Manual (Page 436)

P-335 Series User’s Guide
436 Appendix D Print Server
Installation Requirements
To install the print server driver you will need the following requirements
• Microsoft Windows 95, Windows 98 SE (Second Edition), Windows ME, Windows NT
4.0, Windows 2000, Windows XP or Macintosh OS X
• A computer with an Ethernet port
• RJ-45 cables and a USB cable
The print server must be set up on each computer in your network that you want to use the
print server. Before you set up the print server, make sure the USB printer is connected to the
Prestige using the USB cable and that both the Prestige and the USB printer are turned on.
Windows NT/2000/XP : Print Server Setup Wizard
Use this wizard if you want to set up your network print server on Windows NT 4.0, Windows
2000 or Windows XP. The Setup Wizard for Windows NT/2000/XP allows you to set up
your print server using Line Printer Remote (LPR) protocol. LPR is a cross-platform printing
protocol that uses TCP/IP to establish connections between printers and computers on a
network.
1 Load the CD-ROM that is supplied with the Prestige. Select Network Print Server
Setup.
2 Click the Setup Wizard for Windows NT/2000/XP link.
Figure 258 Network Print Server Setup Wizard
3 The Welcome screen displays. Click Next to continue.