ZyXEL Communications P-335WT - Manual (Page 317)

P-335 Series User’s Guide
Chapter 29 Network Address Translation (NAT) 317
C
H A P T E R
29
Network Address Translation
(NAT)
This chapter discusses how to configure NAT on the Prestige.
29.1 Using NAT
Note: You must create a firewall rule in addition to setting up
SUA/NAT, to allow traffic from the WAN to be forwarded
through the Prestige
29.1.1 SUA (Single User Account) Versus NAT
SUA (Single User Account) is a ZyNOS implementation of a subset of NAT that supports two
types of mapping, Many-to-One and Server. See section Address Mapping Sets for a
detailed description of the NAT set for SUA. The Prestige also supports Full Feature NAT to
map multiple global IP addresses to multiple private LAN IP addresses of clients or servers
using mapping types.
Note: Choose SUA Only if you have just one public WAN IP
address for your Prestige.
Note: Choose Full Feature if you have multiple public WAN IP
addresses for your Prestige.
29.2 Applying NAT
You apply NAT via menus 4 or 11.3 as displayed next. The next figure shows you how to
apply NAT for Internet access in menu 4. Enter 4 from the main menu to go to Menu 4 -
Internet Access Setup.