ZyXEL Communications P-335WT - Manual (Page 67)

P-335 Series User’s Guide
Chapter 3 Wizard Setup 67
Figure 13 Wizard Setup : Internet Access : PPPoE Encapsulation
The following table describes the labels in this screen.
Table 9 Wizard Setup : Internet Access : PPPoE Encapsulation
LABEL DESCRIPTION
ISP Parameter for Internet Access
Encapsulation Choose PPP over Ethernet from the pull-down list box. PPPoE forms a dial-up
connection.
Service Name Type the name of your service provider.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Nailed-Up
Connection
Select Nailed-Up Connection if you do not want the connection to time out.
Idle Timeout Type the time in seconds that elapses before the router automatically disconnects
from the PPPoE server. The default time is 100 seconds.
Next Click Next to continue.
Back Click Back to return to the previous screen.
3.5.3 PPTP Encapsulation
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet.