ZyXEL Communications P-335WT - Manual (Page 386)

P-335 Series User’s Guide
386 Chapter 36 System Maintenance
The following table describes the fields in this menu.
Table 136 Call History Fields
FIELD DESCRIPTION
Phone Number The PPPoE service names are shown here.
Dir This shows whether the call was incoming or outgoing.
Rate This is the transfer rate of the call.
#call This is the number of calls made to or received from that telephone number.
Max This is the length of time of the longest telephone call.
Min This is the length of time of the shortest telephone call.
Total This is the total length of time of all the telephone calls to/from that telephone
number.
You may enter an entry number to delete it or ‘”0” to exit.
36.3 Time and Date Setting
The Real Time Chip (RTC) keeps track of the time and date (not available on all models).
There is also a software mechanism to set the time manually or get the current time and date
from an external server when you turn on your Prestige. Menu 24.10 allows you to update the
time and date settings of your Prestige. The real time is then displayed in the Prestige error
logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Figure 230 Menu 24: System Maintenance
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the
time and date settings of your Prestige as shown in the following screen.