ZyXEL Communications P-335WT - Manual (Page 205)

P-335 Series User’s Guide
Chapter 15 Remote Management Screens 205
15.7 Configuring DNS
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on Wizard Setup for background information.
To change your Prestige’s DNS settings, click REMOTE MGMT, then the DNS tab. The
screen appears as shown.
Figure 92 Remote Management: DNS
The following table describes the labels in this screen.
Table 65 Remote Management: DNS
LABEL DESCRIPTION
Server Port The DNS service port number is 53 and cannot be changed here.
Server Access Select the interface(s) through which a computer may send DNS queries to the
Prestige.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to send DNS queries to the
Prestige.
Select All to allow any computer to send DNS queries to the Prestige.
Choose Selected to just allow the computer with the IP address that you specify to
send DNS queries to the Prestige.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 64 Remote Management: SNMP
LABEL DESCRIPTION