ZyXEL Communications P-335WT - Manual (Page 123)

P-335 Series User’s Guide
Chapter 7 Wireless LAN (P-335WT) 123
7.6 Roaming
See the appendix for background information on roaming.
To enable roaming on your Prestige, click the WIRELESS link under ADVANCED and then
the Roaming tab. The screen appears as shown.
Figure 43 Roaming
The following table describes the labels in this screen.
Table 35 Roaming
LABEL DESCRIPTION
Active Select Yes from the drop-down list box to enable roaming on the Prestige if you have
two or more Prestiges on the same subnet.
Note: All APs on the same subnet and the wireless stations must
have the same SSID to allow roaming.
Port Enter the port number to communicate roaming information between APs. The port
number must be the same on all APs. The default is 3517. Make sure this port is not
used by other services.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to reload the previous configuration for this screen.
MAC Address Enter the MAC addresses of the wireless station that are allowed or denied access to
the Prestige in these address fields. Enter the MAC addresses in a valid MAC address
format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to reload the previous configuration for this screen.
Table 34 MAC Address Filter
LABEL DESCRIPTION