ZyXEL Communications P-335WT - Manual (Page 83)

P-335 Series User’s Guide
Chapter 5 System Screens 83
5.5 Configuring Password
To change your Prestige’s password (recommended), click SYSTEM, then the Password tab.
The screen appears as shown. This screen allows you to change the Prestige’s password.
Figure 25 Password
The following table describes the labels in this screen.
Table 21 Password
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the
system in this field.
New Password Type the new password in this field.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.
5.6 Configuring Time Setting
To change your Prestige’s time and date, click SYSTEM, then the Time Setting tab. The
screen appears as shown. Use this screen to configure the Prestige’s time based on your local
time zone.
Use specified IP
Address
Type the IP address of the host name(s). Use this if you have a static IP
address.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.
Table 20 DDNS
LABEL DESCRIPTION