ZyXEL Communications P-335WT - Manual (Page 54)

P-335 Series User’s Guide
54 Chapter 2 Introducing the Web Configurator
Figure 5 Change Password Screen
You should now see the MAIN MENU screen)
Note: The management session automatically times out when
the time period set in the Administrator Inactivity Timer field
expires (default five minutes). Simply log back into the Prestige
if this happens to you
2.3 Resetting the Prestige
If you forget your password or cannot access the web configurator, you will need to use the
RESET button at the back of the Prestige to reload the factory-default configuration file. This
means that you will lose all configurations that you had previously and the password will be
reset to “1234”.
2.3.1 Procedure To Use The Reset Button
1 Make sure the PWR LED is on (not blinking).
2 Press the RESET button for ten seconds or until the PWR LED begins to blink and then
release it. When the PWR LED begins to blink, the defaults have been restored and the
Prestige restarts.
2.3.2 Navigating the Prestige Web Configurator
The following summarizes how to navigate the web configurator from the SITE MAP screen.
• Click WIZARD for initial configuration including general setup, Wireless LAN Setup,
ISP parameters for Internet Access and WAN IP/DNS Server/MAC address assignment.
• Click a link under ADVANCED to configure advanced Prestige features.
• Click BW SETUP for initial configuration of media bandwidth management.