ZyXEL Communications P-335WT - Manual (Page 61)

P-335 Series User’s Guide
Chapter 3 Wizard Setup 61
3.3.1 Wizard Setup : Wireless LAN : Basic Security
Choose Basic(WEP) to setup WEP Encryption parameters.
Security The Security can be selected as auto, none, basic or extended.
Choose Auto to use WPA-PSK security with a default Pre-Shared Key and proceed
to another wireless LAN setup screen where you can enable OTIST. Choose this
option only if your wireless clients support WPA-PSK.
Choose None to have no wireless LAN security configured and proceed to another
wireless LAN setup screen where you can enable OTIST.
Choose Basic(WEP) security if you want to configure WEP Encryption parameters.
Choose Extend(WPA-PSK) security to configure a Pre-Shared Key.
The third screen varies depending on which security level you select.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Note: The wireless stations and Prestige must use the same
SSID, channel ID and WEP encryption key (if WEP is enabled)
or WPA-PSK (if WPA-PSK is enabled) for wireless
communication.
Table 4 Wizard Setup : Wireless LAN
LABEL DESCRIPTION