ZyXEL Communications P-335WT - Manual (Page 80)

P-335 Series User’s Guide
80 Chapter 5 System Screens
Figure 23 System General Setup
The following table describes the labels in this screen.
Table 19 System General Setup
LABEL DESCRIPTION
System Name System Name is a unique name to identify the Prestige in an Ethernet network.. It
is recommended you enter your computer’s “Computer name” in this field (see the
Wizard Setup chapter for how to find your computer’s name). This name can be
up to 30 alphanumeric characters long. Spaces are not allowed, but dashes “-”
and underscores "_" are accepted.
Domain Name Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Administrator
Inactivity Timer
Type how many minutes a management session (either via the web configurator
or SMT) can be left idle before the session times out. The default is 5 minutes.
After it times out you have to log in with your password again. Very long idle
timeouts may have security risks. A value of "0" means a management session
never times out, no matter how long it has been left idle (not recommended).
System DNS Servers (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
computer before you can access it. The Prestige uses a system DNS server (in the order you specify
here) to resolve domain names for VPN, DDNS and the time server.