ZyXEL Communications P-335WT - Manual (Page 150)

P-335 Series User’s Guide
150 Chapter 9 Network Address Translation (NAT) Screens
Figure 59 SUA/NAT Setup
The following table describes the labels in this screen.
Table 46 SUA/NAT Setup
LABEL DESCRIPTION
Default Server In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen.
If you do not assign a Default Server IP Address, the Prestige discards all packets
received for ports that are not specified in this screen or remote management.
# Number of an individual SUA server entry.
Active Select this check box to enable the SUA server entry. Clear this checkbox to
disallow forwarding of these ports to an inside server without having to delete the
entry.
Name Enter a name to identify this port-forwarding rule.
Start Port Enter a port number here. To forward only one port, enter it again in the End Port
field. To specify a range of ports, enter the last port to be forwarded in the End Port
field.
End Port
Server IP
Address
Enter the inside IP address of the server here.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.