ZyXEL Communications P-335WT - Manual (Page 276)

P-335 Series User’s Guide
276 Chapter 21 Maintenance
Figure 132 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default Prestige IP address (192.168.1.1). See
your Quick Start Guide for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Figure 133 Configuration Restore Error
21.7.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the Prestige to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
Prestige. Refer to the Introducing the Web Configurator chapter for more information on the
RESET button.
21.8 Restart Screen
System restart allows you to reboot the Prestige without turning the power off.
Click MAINTENANCE, and then Restart. Click Restart to have the Prestige reboot. This
does not affect the Prestige's configuration.