ZyXEL Communications P-335WT - Manual (Page 185)

P-335 Series User’s Guide
Chapter 13 Firewall 185
Figure 82 Firewall: Settings
The following table describes the labels in this screen.
Table 57 Firewall: Settings
LABEL DESCRIPTION
Enable Firewall Select this check box to activate the firewall. The Prestige performs access control
and protects against Denial of Service (DoS) attacks when the firewall is activated.
Bypass Triangle
Route
Select this check box to have the Prestige firewall ignore the use of triangle route
topology on the network. See the appendix for more on triangle route topology.
Max NAT/Firewall
Session Per User
Type a number ranging from 1 to 2048 to limit the number of NAT/firewall sessions
that a host can create.
LAN to WAN To log packets related to firewall rules, make sure that Access Control under Log
is selected in the Logs, Log Settings screen.
Packets to Log Choose what LAN to WAN packets to log. Choose from:
No Log
Log Blocked (blocked LAN to WAN services appear in the Blocked Services
textbox in the Services screen (with Enable Services Blocking selected))
Log All (log all LAN to WAN packets)
WAN to LAN To log packets related to firewall rules, make sure that Access Control under Log
is selected in the Logs, Log Settings screen.